Catch It II 

The CATCH-IT II WATER TABLE is designed as the ultimate tool for fine gold recovery! It is efficient, light-weight, portable and tough! "It's so simple and easy to operate, and it gets all the gold" compared to other types of equipment to finish gold concentrates. Most of those products take a lot of time and many classifications, while the Catch-It II is the quickest, easiest and the most efficient way to get all your fine gold in ONE simple, easy and quick operation.

Classify your cons through a 12 mesh screen-- that is all. You will then capture the gold from -12 thru -200 mesh and smaller. No need to put your hands in the water flow to mix it up and GET OIL ON THE GOLD from your hands. The Catch-It II water table has been a wonderful piece of equipment to many prospectors across the world that have had issues with separating the very fine gold from the black sands. Scroll down to watch the action videos of the Catch-It II.

Catch It II Water Table
ACTUAL dimensions of Water Table: 12 inches wide x 16 inches long x 1.5 inches deep.
ACTUAL dimensions of Tub: 15.5 inches wide x 24 inches long x 12 inches deep.
(demo photos shown use a smaller, demo sized Water Table)

The CATCH-IT II Water Table is an amazing finishing machine that is designed to recover fine gold. Processing is quick and recovery efficiency is high. It comes in a rugged plastic tote that will protect the table from damage when in transit or storage. Included in the tote is the water table, a tailings bin, a 110 VAC submersible mini-pump, one small brush and instruction sheet.
The aluminum table has a unique green surface that attracts gold. Just sprinkle clean gold concentrates onto the water covered table. The flowing water stratifies the material, allowing the gold to separate and stick to the green surface while the blond and black sands float away. The water flows in parallel layers with no disruption between layers which is called laminar flow. This is different to flow that undergoes irregular fluctuations or mixing called turbulent flow. This type of flow is seen in sluice boxes with riffles. The laminar flow is the result of two factors, a flow/pressure equalizer element and a discharge slot that releases the water in a smooth sheet.
CATCH-IT II water table
All that is left to do is to brush the gold to one spot and snuffer it up! NOTE: Most of the magnetic sands should be removed from the concentrates prior to using the CATCH-IT  II. This simple operation will speed up the process and improve gold recovery.
Watch the Video Below & See the
Check out the video below. It's a bit long but it shows how to use the Catch It II from collecting your paydirt to bagging up your gold!