Join Us on Facebook! Are you on Facebook? If so, please "Like" our page where we post helpful tips, special sales, industry news, and brag about YOU and your success!
Looking for a gold recovery product that can process tons of concentrates into mere ounces? The Gold Cube can retrieve your gold from the black sand you've gathered from rivers, beaches, etc. With a 12-volt battery (not included) and a small 12 volt pump you're ready to clean up your concentrates QUICKLY!
The Gold Cube is a small enough to fit into the trunk of your car and consists of stacking trays made of indestructible plastic LDPE (low density polyethylene) that's as thick as a cutting board. A basic Gold Cube consists of 1 slick plate and two concentrator trays, but add as many trays as you like, depending on your specific needs and location, it's totally up to you!
Fiddle-free water control and slick plate.
Unique G-Force technology cleans and separates the gold.
Vortex matting traps gold and self cleans for hours of use.
A patent-pending, proven product backed by countless hours of research & development!
Scroll down this page to learn more about how and why the Gold Cube works so well. Watch the video, too!
Introducing the NEW Gold Banker!
The Gold Cube is now shovel ready! Take the hassle out of pre-classifying and increase your yield at the same time with this NEW Gold Banker (manufactured by Gold Cube). The 3/16th punch plate topper acts like a huge classifier. Already own a Gold Cube? Buy the top part only and then simply attach the stand extensions to your existing Cube stand and attach the 5 foot hose and you are ready to go for the gold!
The Gold Banker can be used as a highbanker / beach box configuration using the standard 1100 gph pump that is included in the Combo Kits below.
The Gold Banker is constructed of thick ABS material with built in adjustable spray bar. The punch plate is anodized or stainless steel (your choice) that simply slides into the unit. Stainless is the best choice for salt water use, or just give the less expensive anodized version a good rinse with fresh water.
4-Stack Deluxe Gold Cube and Gold Banker Combo Kit includes: One Slick Plate, Three Separator Trays, Stand, Pump, Hose, Hose Adapters, Gold Banker top unit with spray bar, Stand extensions, and an Extra 5 feet of hose.
Item: GC-4DLX-GBer
3-Stack Deluxe Gold Cube includes: One Slick Plate, Two Separator Trays, Stand, Pump, Hose, Hose Adapters, Gold Banker top unit with spray bar, Stand extensions, and Extra 5 feet of hose
Item: GC-3DLX-GBer
Slick Plate. The slick plate on the Gold Cube has a precisely controlled water flow that is designed to process very large amounts of 8 mesh and smaller material in a very short time. Withcontrolled water flow, the slick plate does 2 things:
1. It turns aggregate material into a slurry, and
2. The water flow forces the lighter particles ahead of the heavier material.
It is quite exciting to actually see your fine gold creeping down the slick plate! Gold, the heaviest element in the slurry, will be the last to reach the trough.
G-Force Separator. The slurry then falls into a gated trough and will be forced under water. Then centrifugal force will force the gold to the outer edge of the rounded trough. The slurry will then exit the trough on the opposite side of the gate. After exiting the gated trough, the slurry is forced to stand up and form a column. The purpose of this column is to actively stack the particles by specific gravity. Lighter, faster moving particles race past the heavier particles and exit the column first. The Gold Cube's forced gravitational, centrifugal and columning effect is called "the G-Force."
Vortex Matting. The Gold Cube's vortex matting works because water flow interacts with a combination of very small pillar walls and cavities—about 7,056 of them per mat. Just like a tornado, the spinning creates a low pressure zone in the center of each of the cavities. Passing gold will be trapped and forced to the bottom of the vortexes and held in place by the lighter material. As gold-laden material is introduced into each vortex mat, it will displace and replace the lighter material. This will create about a cup of super concentrates at clean-up. Amazing!
How The G-Force Separator Works on the Gold Cube
(1) 8 mesh or smaller gold bearing material is added to the water flow (2) on the slick plate (3). The slurry (4) drops into the G-Force Separator (5). The slurry accelerates around the bottom of the trough and the centrifugal force helps move gold outward (6). As all the material leaves the G-Force Separator, high volume water carries the lighter material up and away (7). The gold is then dropped into the beginning of the vortex mat (8). This process is repeated in each of the Gold Cube's separation trays.
"Here is a photo of Rick using the Gold Cube and also the gold we have found after about 10 hours of playing in MONTANA! I just wanted to let you know it worked GREAT! We were so excited and had so much fun. We were really amazed in how the Gold Cube was able to pick up very small pieces of gold. This is a great piece of equipment. We were also very impressed with your customer service. You are a great company to work with and whenever we need something else we will buy from you." —Kerissa & Rick
Rick in Montana using the Gold Cube
Gold found in Montana after 10 hours of using the Gold Cube.
Gold Prospecting, Gold Mining, Metal Detecting, Treasure Hunting, Woodman's Pal Machete and More!
