Gold Genie Miner  Item: 6669

Gold Genie manufactures three different quality spiral recovery systems in their Oregon facility and provides a 5 year factory warranty with a 1 year warranty on the pump and motor. All three are designed to recirculate water with the 12 volt pump which is provided.

The Gold Genie spiral recovery systems have a quality 18 inch blue spiral pan for easy observation of both gold and black sand. The pan is injection molded from polypropylene plastic. The injection molding under heat and pressure assures an exact copy of the mold with sharp definition of the ridges in the pan which are critical for gold recovery. The deep cut spirals with sharp edges allows the system to work wet or dry.

Controls for both the water volume on the spray bar and the critical angle of the pan are designed to be easily and accurately adjusted.

The heavy duty 12 volt dc motor has a 2 speed switching system. The low speed is about 15 rpms and the high speed is about 22 rpms. The switch allows high speed, low speed, and center off. A separate switch is provided for the 12 volt dc water pump so that the unit can operate with or without water. The motor and pump have a total current draw of less than 4 amps.

Gold is collected on the back side of the pan in a high capacity 10.5 inch gold pan. The fitting in the center of the pan that the gold travels through is made of high quality stainless steel so that the unit can be used for amalgamation. The frame is made from anodized steel for years of attractive service!

The Miner Model is designed for high volume applications with adjustable height frame and a plastic skirt which directs all the waste material to the rear.