Skip to main content
#
 
cart
our twitterour facebook page pintrest youtube
Latest Posts
Archive
Categories

 Nuggets of News Blog 

Tuesday, June 01 2021

The Bureau of Land Management (BLM) is responsible for managing approximately 245 million acres of Federal surface estate and 700 million acres of subsurface mineral estate. In the past, miners would have accessed the BLM’s Legacy Rehost system, commonly known as LR2000, to do research. While helpful, that system was also frustrating to use, so you’ll be happy to know that LR2000 has been decommissioned and the NEW Mineral Land Records System (MLRS) has taken its place.Mineral & Land Records System

MLRS is a geospatially enabled online land information system that allows miners to more readily research land status, discover mining claim activity, file new claims, pay fees, and more. Signing up for a MLRS account is useful if you have business with the BLM involving mining claims. MLRS is free to use, and there are no additional fees to create an account.When you sign up for an MLRS account, you get access to several useful tools that will enhance your BLM experience— file and manage your claims, receive real-time status updates, access advanced mapping tools, and interact with the BLM online.You should register with MLRS if you are a:

• Recreational miner
• Small mining business owner
• Large mining corporation employee
• Mining association member
• Person who is interested in bookmarking research maps or saving your search results

Your account type is determined by your needs.

• Create a personal account if you own your claims as an individual and will be the only user within the account.

• Create a business account if your claims are owned by a business, you plan to add employees to the account, and/or you will be using a business email.

As the capabilities of MLRS grow in the future, an even wider range of mission-critical BLM services and products such as permits, leases, rights-of-way, the ability to provide electronic signatures on documents, and more will be available. In the meantime, check out the new system that offers state-of the-art mineral and land records transactions, tracking, and mapping. With the new system, you’ll get your research done much faster than using topo maps, and that means more boots-on-the-ground prospecting time this summer!

Posted by: Denise AT 05:27 am   |  Permalink   |  Email
Sunday, April 25 2021

Depending on where you live, spring is in the air, either a little or a lot. What that mostly means is we're all getting out and about more to prospect for gold, metal detect, and just clean up around our property. Especially as restrictions from Covid-19 are lifted, we’re hankering to get out and have fun.  In general, springtime ushers in rain, warmersnake gaiters temperatures, and blooming flowers. You can add something else to that list: snakes.

Snakes love warmer days. As reptiles, their body temperature mirrors air temperature, so it’s common to begin seeing many more snakes this time of year. And that means spring is also a good time to be extra vigilant about where you step and sit. Most rattlesnake bites occur when you accidentally step on or near a snake and startle it. That’s easy to do when you’re zoning out swinging a detector or hiking in tall grass toward your favorite gold-bearing river.  When you are otherwise distracted by gold fever or a chore (stacking wood, cleaning out your shed, landscaping), you might not be thinking about where you’re putting your hands and feet.


People have a lot of fear about snakes and think they’re dangerous. If you are harassing a rattlesnake or trying to grab one and they bite you, yes, they can be dangerous. But if you leave them alone, they are not purposely going to attack you. After all, a snake uses its venom for food, not for defense. Most snakes are not outwardly aggressive unless provoked or startled. Some snakes, such at the cottonmouth, are known to be more aggressive than others, but again, that’s only when harassed.


Keep in mind that snakes of many species are done hunkering down now that the weather is warmer, making human encounters more likely with ALL types of snakes. You might even see snakes in more northern areas where you’ve not seen them before.  In general, rattlesnakes are most active from March through October. In the spring, they are active during daylight hours. As days become increasingly hot around early May, rattlesnakes become more active at night and spend the day in a spot of shade or a cool shelter.  


If you are bitten by a snake, the Mayo Clinic advises:

    •    Call 911 immediately or get yourself to a hospital as quickly as possible.
    •    While waiting for medical help, stay calm and position the body so that the bite is at or below heart level.
    •    Remove jewelry or tight clothing before swelling starts.
    •    Do NOT apply ice or a tourniquet on or near the bite.
    •    Do NOT cut the wound or attempt to suck out the venom.
    •    Do NOT drink caffeine or alcohol, which could speed the body's absorption of venom.

As you venture outside this spring and summer, help protect your lower legs with snake gaiters— they also  help protect against thorns, briars, and cacti needles. If you've ever brushed against them by accident, you know how painful that can be!  Snake leggings are used by the US Border Patrol, US Forestry Service, hunters, hikers, fishermen, ranchers, surveyors, realtors, landscapers, and thousands of treasure hunters who need protection for lower legs. Don’t take a chance! Take precautions to be safe this season— whether in the desert or woods — by adding snake gaiters to your list of “must have” equipment.

Posted by: Denise AT 03:46 pm   |  Permalink   |  Email
Monday, March 15 2021

Spring is in the air, and Garrett is making it a little easier on your wallet to get out there and start swinging a new metal detector! For a limited time, Garrett is offering two specially-priced packages. Each package includes a metal detector, headphones, an AT Pinpointer, and Garrett Edge Digger. You save $134.90 on a package as compared to buying each component separately. Both packages have FREE SHIPPING, too!Garrett metal detector packages spring 2021

Garrett AT Pro Metal Detector and Headphones. The AT Pro is Garrett's all-terrain, all-treasure, deep-seeking, professional treasure hunter's detector! This all-terrain detector offers new and exclusive Garrett technology that makes highly recommended for Coin Hunting, Jewelry Hunting, Relic Hunting, Cache Hunting, Prospecting, Ghost Town Hunting, Competition Events, Beach/Fresh Water Hunting. Select from either Standard or Professional search modes with enhanced audio features. The AT Pro was designed to work in challenging environments such as mineralized ground, high trash areas, wet and humid areas and dust. In fact, the entire metal detector can be submerged under water to a dept of 10 feet, so it's an excellent choice for detectorists who might also be gold prospectors working in streams, ponds, or shallow water off the shoreline. Includes upgraded MS-2 headphones, Pro-Pointer AT Pinpointer and Garrett Edge Digger. Details on AT Pro Spring 2021 package here.

Garrett ACE 400 Metal Detector and Headphones.  The top of the ACE family, the 400 has a new Iron Audio feature, a powerful DD coil, a higher frequency, and volume control headphones. Its advanced features make the ACE 400 powerful on coins, jewelry, and artifacts. Features a 8.5” x 11” PROformance DD submersible searchcoil. Comes with Pro-Pointer AT Pinpointer, Garrett Edge Digger, and ClearSound Easy Stow Headphones that feature padded ear pieces, 41 inch coiled cord extends to 82 inches, and 1/4 inch phone plug. Details on ACE 400 Spring 2021 package here.

Metal Detectorist Code of Ethics

  • Always check federal, state, county and local laws before using your metal detector. It is your responsibility to “know the law.”
  • Abide by all laws, ordinances or regulations that may govern metal detecting in the area you will be in.
  • Never trespass. Always obtain permission prior to entering private property, mineral claims, or underwater salvage leases.
  • Do not damage, deface, destroy, or vandalize any property (including: ghost towns and deserted structures), and never tamper with any equipment at the site.
  • Never litter. Always pack out what you take in, and remove all trash your metal detector uncovers during your search.
  • Fill all holes, regardless how remote the location, and never dig in a way that will damage, be damaging to, or kill any vegetation.
  • Do not build fires, camp or park in non-designated or restricted areas.
  • Leave all gates and other accesses to land as found.
  • Never contaminate wells, creeks, or any other water supplies.
  • Be courteous, considerate, and thoughtful at all times when metal detecting.
  • Report the discovery of any items of historic significance you find with your metal detector to the local historical society or proper authorities.
  • Uphold all finders, search and salvage agreements.
  • Promote responsible historical research and artifact recovery, and the sharing of knowledge with others.
Posted by: Denise AT 01:38 pm   |  Permalink   |  Email
Sunday, March 07 2021

Dave Turin Gold Rush

Raw TV in London is the maker of the Discovery Channel's hit TV series Gold Rush. You might also have watched a spin-off, Dave Turin's Lost Mines. Dave is looking to hire a geologist with placer /hard rock mining experience to join his mining crew on that Discovery show. Ideally, the candidate will have specialized in gold mining and have experience working with placer and/or hard rock deposits. Applicants must be over 18, eligible to work in the US, and happy to appear in a new season of Dave Turin’s Lost Mine. You must be willing and able to leave home and join his gold mining crew potentially from May - October 2021.

If you are a geologist who would love to be considered for this role, or know someone, visit this link https://www.raw.co.uk/takepart/geologist-miners-wanted

Closing date to apply is April 15, 2021.


 

Posted by: Denise AT 01:15 pm   |  Permalink   |  Email
Monday, March 01 2021

A gold pan is the simplest and most basic prospecting tool and is one of the oldest types of gold concentrating equipment. Plastic pans are recommended over the steel pans used by the 49ers. Plastic is light weight, so when you add water, dirt, and gravel to your pan, your arms won't get as tired compared to using a steel pan. And they do not rust or conflict with the use of a magnet.  Size, color, and shape are really a matter of personal preference. You might want to have a couple different sizes of gold pans on hand (10 inch, 12 inch, and 14 inch are the most popular). Plastic pans generally come in green, black, and blue. The color doesn't effect performance, but green is the most common. The bright blue cone-shaped batea is the newest type of gold pan to hit the U.S. market. Gold panning kits are often the most economical way to purchase gold pans and classifiers (often called sifting pans) and other small accessories all in one convenient box.   gold panning

The point of panning is to shake the gravels, allowing the gold to settle downward and then to wash the lighter material off the top. When all the lighter material has been removed, only the heavy concentrates will remain in the bottom of the pan, including, hopefully, some gold! With a little practice, anyone can learn to pan for gold. Buying a bag of gold-bearing paydirt to use over and over again for practice in a tub is one way to  get good at panning without ever leaving home. Gold panning “how to” steps founds here.


When outdoors in a stream digging gravels, remove big pebbles and stones from your pan before you begin.  When looking for a place to pan, look for cracks and crevices in the bedrock of a stream (bedrock is a general term for the solid rock that sits under all sand and gravel) because gold can get caught and accumulate  in cracks. Gold moves during periods of flooding and can drop out of fast-moving water into crevices. Mossing for gold is another technique that is easy to do with a pan. The green moss that grows on rocks near the edge of a stream often has a surprising capacity to catch and hold fine-sized gold. It’s almost like the matting on the bottom of a sluice (often called “miner’s moss”). Gold can get caught in the tendrils and structure of the moss and while the gold recovered from moss is tiny, sometimes there is a significant amount of it. Take the moss off the rocks from a spot close to the stream and at a level where, when the stream is in flood stage, the moss will be underwater. Carefully peel the moss off the rocks, breaking it up and washing out all the sand and silt. The material recovered from the moss can then be carefully panned out.

Gold concentrations are spotty, even in known gold-bearing areas, so sample and test often. Be sure to move on with your gold pan and don’t stay in one spot less you have good results. If you find a spot with fairly large amounts of gravel that yields good gold, then it’s time to bring in a sluice box. A sluice is simple to operate and have been used all across the world for thousands of years. After you’ve mastered gold panning and are ready to increase the amount of gravel you can process, a sluice box is your next step up from hand panning. Sluices come in a variety of sizes, most with gold-catching matting in the bottom that you need to clean up at the end of the day. Other models such as the Gold Well Vortex Drop Riffle Sluice, has no matting or carpets and uses vortex technology to catch fine gold.

sluice boxThe basic sluice box is set in a stream and runs off the natural flow of water in the rivers. An experienced prospector might be able to pan up to a cubic yard of gravel per day, yet you can run that same cubic yard of gravel through a sluice box in less than an hour. Surface flood-type gold or gravel bars on inside bends of streams can both be very productive with just a simple sluice. It’s not too difficult to operate because it is fairly forgiving of the surges of gravel that drop in with each shovel full. To work properly, a sluice needs a good amount of water. The simple rule is just enough water flow should be going in the feed gravels to move the material through and out of the sluice in a reasonable time, allowing only a little of the heavier materials to build up behind the riffles. With too little water, the incoming material simply piles up as the rocks stop and get stuck in the sluice box. If the flow is too fast, fine gold will be blown out with the gravels. The optimum water flow is just what it takes to keep things clear in a reasonable time — no more than 20 or 30 seconds. The riffles should not become fully buried, with the entire bed of the sluice blanketed over by gravel. For maximum recovery, the flow should be a little turbulent, yet not frothy in any way. Excessive turbulence results in poor fine gold recovery.

As with the pan, the real secret of successful prospecting is not in operating the equipment, but in the skill of finding those natural gold catches. Learning to read the river or stream and recognize the places where gold might accumulate and then sampling those places to see if you are correct is the best technique. Inside bends, behind boulders or bedrock outcrops, and inches above the stream flow are all good places that you might sample, but there are plenty of other possibilities as well. The sluice and the gold pan may be among the most basic prospecting tools, but they are tried and true ways of finding some good gold!

Posted by: Denise AT 05:35 am   |  Permalink   |  Email
Friday, February 19 2021

There are many interesting facts about the element gold, which is listed on the periodic table as Au. Au—comes from the old Latin name for gold, aurum, which means "shining dawn" or "glow of sunrise." The word gold comes from the Germanic languages, originating from the Proto-Germanic gulþ and Proto-Indo-European ghel, meaning "yellow/green." The Aztec word for gold, "teocuitatl," translates to "excrement of the gods."  Its atomic number is 79. 

A few more fun and fascinating facts about gold include:

  • Gold is the most malleable element. A single ounce of gold (about 31 grams) can be stretched into a gold thread 5 miles long and beaten into a 300-square-foot sheet. A sheet of gold can be made thin enough to be transparent. You could even scratch pure gold with a fingernail.
  • A karat is a unit of purity. And the karat number will determine the amount of gold in a particular piece. It is measured on a scale from eight to 24 in increments of two, with the higher number representing greater purity. However, almost nothing is pure gold or, 24 karats, with jewelry topping out at 22 karats. That’s because typically, when crafting gold jewelry, the gold must be mixed with another metal, such as copper or silver to make it usable.
  • Gold is a pure element and is the only truly yellow metal on Earth. Other metals may develop a yellowish color, but only after they have oxidized or reacted with other chemicals.
  • Gold has been found on all seven continents, but the first gold discovered in the United States was in 1799. A boy, Conrad Reed, found a 17-pound nugget in Cabarrus County North Carolina and used it as a door stop! This discovery happened 50 years prior to the famous California Gold Rush of 1849.
  • Nearly all the gold on Earth came from meteorites that bombarded the planet over 200 million years after it formed.
  • Gold’s melting point is 1,947ºF or 1,064 °C. Gold boils at 2,850°C.  Small gold melting kilns are used by hobbyists.
  • Olympic gold medals were pure gold until 1912. Currently, they're made up of 494 grams of silver and only 6 grams of gold.
  • Fort Knox contains around 50% of the United States’ gold reserves. It has never been robbed. In fact, no one has even attempted carrying out such an operation. With 30,000 soldiers, a surrounding minefield, Predator drones doing routine surveillance, and 20-ton vault doors (which no single person has a combination to), it’s an impossible undertaking.
  • Gold can be consumed in small quantities and is often added to luxury beverages and foods, but it has no known nutritional or taste value. It is considered biologically inert, which means that it can be digested without being absorbed or interacting with your body.
  • If all of the world’s gold that has ever been mined were collected, it would fill three Olympic-sized swimming pools— each 164 x 82 feet x 6 feet deep— a combined 157,000 metric tons.
  • Gold is the most popular precious metal for investments. The price of gold constantly fluctuates and is often linked to major economic events. Generally, the value of gold tends to move inversely to the value of the US dollar. For example, when the value of a dollar increases, the price of gold drops as it is relatively more expensive for those in other countries to purchase. The opposite is likewise true.
  • Gold panning is fun for the whole family. You can even buy Alaskan paydirt and have it shipped to your home.
  • Aurophobia is the fear of gold. And probably no one reading this has ever been diagnosed with that condition!  Gold fever, however, is another story!
Posted by: Denise AT 07:30 pm   |  Permalink   |  Email
Monday, January 18 2021

As of 2020, there were about 3,891,000 mining claims filed on federal lands across open-for-mineral-entry states. If you want to join the ranks, the following will be extremely helpful. This information was published in November 2020 by Kevin Hoagland, Executive Director of Development, Gold Prospectors Association of America (GPAA). 

What is a Mining Claim?registered mining claim

A mining claim is a selected parcel of Federal land, valuable for a specific mineral deposit(s), for which you have asserted a right of possession under the General Mining Law. Your right to the claim is for the extraction of those minerals. The rights granted by a mining claim protect against a challenge by the United States and other claimants— but only after the discovery of a valuable mineral deposit.  Your claim is not protected from the government or other miners until you have a discovery of a valuable mineral, recorded in the county of location, and have filed a mining claim with the Bureau of Land Management  (BLM). There are two types of mining claims—lode and placer. In addition, mill sites and tunnel sites may be located to provide support facilities for load and placer mining claims.

Once all the steps— locate, record and file— are properly completed, then you have rights to the minerals only on the claim. You cannot live on a claim unless you have a Plan of Operations (POO) that includes project occupancy, and that will allow only limited occupancy during the duration of the project and is most likely going to be added into the required bond of the project within the POO and the Notice of Intent (NOI). If you do not have an occupancy, then you are required to follow the stay limits of 14 days in any given 28-day period.

You cannot keep other people off your claim with the exception of people trying or working to recover the valuable minerals that are on your claim. This is clearly defined as mineral trespass and is enforceable. However, if people want to use your claim for day-use recreation, or for camping or hunting at various times of the year, you cannot legally not allow them ingress to your claim unless you have an in-place POO that designates a mining area and other areas that support your efforts to recover valuable minerals. The BLM will work with a POO holder to include as much of the claim as possible to keep ingress limited for safety.

Who Can File a Mining Claim?

A person who is a citizen of the USA or has declared an intention to become a citizen with the Immigration and Naturalization Service may locate and hold a mining claim or site. A corporation organized under state law is considered a citizen and may locate and hold a mining claim or site. A corporation is held to the same standards as a citizen. There is no limit to the number of claims and sites that you may hold as a qualified claimant, as long as you meet the General Mining Law requirements of the claims filed after a valuable mineral find has been located.

Where Can You File a Mining Claim?

As of this writing, there are 19 states where you may locate mining claims or sites: Alabama, Alaska, Arizona, Arkansas, California, Colorado, Florida, Idaho, Mississippi, Montana, Nebraska, Nevada, New Mexico, North Dakota, Oregon, South Dakota, Utah, Washington, and Wyoming.

mining claim sign

Who Maintains All of This?

The BLM manages the surface of public lands in these states and the Forest Service manages the surface of National Forest System lands. The BLM is responsible for the subsurface minerals on both its public lands and National Forest System lands. You may prospect and locate mining claims and sites only on lands open to mineral entry.  Some recreational areas are open to the public for casual prospecting (usually just for gold panning by hand); these areas would not be considered open to mineral entry, therefore, you cannot file a claim in certain recreational areas.

How to File a Mining Claim

To file a claim, you need to start by prospecting to find a valuable recoverable metal. There are a number of ways to get started in finding an area open for claiming. Using computer programs such as the BLM LR2000, you can get a much better view of what is and is not open for claiming. After you have prospected and found gold or other mineral you wish to extract, you will want to stake a claim.

Using your GPS or a topo map and compass, figure out exactly where you are. Set your Point of Discovery (POD), then find your corners. A placer claim is 20 acres— a rectangle that is 660 feet from west to east, and 1,320 feet from north to south. Situate your claim as close to the topo section lines as possible and create your location notice and draw your map.

The map must include the township (an area of 36 miles), the range (the area either east or west of the principle meridian, which is on the bottom of each topo map), and section (each section is 1 square mile; 36 sections make up a township). Within the section there are quarters and halves that are broken down to the smallest part, which is 20 acres.

TIP:  Walk the entire claim and make small rock cairns at each of the corners based on GPS to find the spots more easily when you come back to mark the corners. Knowing how far it is from the POD to the NW corner and SE corner is also helpful. You will need that info. when recording and filing your claim.

federal mining claim

Once recorded, take your recorded document to the BLM office closest to you that accepts filings. Present your county-recorded documents and your map. The BLM will quickly review your paperwork, assign a Mining Claim (MC) number, take your money and hand you back copies of your docs with the MC number for your records and to post on the claim.

Ask both the county and the BLM what is acceptable for your markers and what is required. In some states, all that is required is the POD and not corners. But your MC paperwork at the POD MUST have the distance from the POD to a corner or distance to a Public Lands Survey (PLS) Marker. You have now recorded and filed and have an approved mining claim.  Set your corners and markers and you’re done!  Mining Claim Signs found here. 

CONGRATULATIONS and good luck getting the GOLD! 

Posted by: Denise AT 12:56 pm   |  Permalink   |  Email
Sunday, December 20 2020

 

There is truly no single “best” type of detector when it comes to gold hunting. But understanding the differences between a VLF (very low frequency) and a PI (pulse induction) detector and their coils can help you decide which detector might be the “best” to use in a Garrett Ace Apex Metal Detectorparticular situation.  VLF metal detectors are the most common. It is a single or multi-frequency machine that consists of a continuous sine wave. Sine waves travel down into the ground to find a metallic target, and once it does, the machine charges the target, releases an eddy current, and sends back a signal. The PI metal detector is not a continuous sine wave. Instead, it pulses on and off and on and off.  It “talks” and then “listens.” 

A VLF machine can have an advantage on shallow and very small targets, on and off of bedrock— as long as you can keep it stabilized, ground balanced, and the sensitivity set properly.  PI detectors generally do better at greater depths than VLF machines, especially in highly mineralized soils.

Mono coils are designed for PI detectors. There is a single winding inside the coil that puts a concentric pattern into the ground. You will always get more depth with a mono coil, but it is more susceptible to ground mineralization noise and it will be affected by the ground mineralization itself.

Double D coils work for both PI and VLF detectors. Double D coils have two back-to-back D shaped windings inside the coil. At all times the coils are transmitting and receiving across the plane of the coil. The Double D design is like a knife blade that goes into the ground down the center of the coil. These coils are great at handling mineralization where it essentially takes the ground mineralization and distributes it all the way across the blade, lessening its effects.

Concentric coils work with VLF detectors by using two separate windings inside the coil— one sends and one receives.

When it comes to a round versus elliptical coil, there is really no difference in the size, only shape. Coils are measured off of a round coil configuration.  For example, a 14 x 10 inch coil will have the same attributes as a 12-inch coil. The key difference is that elliptical shapes work extremely well in difficult areas.

Although each metal detector has its pros and cons, you can’t go wrong by wearing the best headphones possible, no matter which brand or model you choose. Many gold nuggets you will find are only slight whispers in the detector’s threshold, so you want to always wear high quality headphones. Plastic scoops and a digging tool with a wide blade should also be in your accessory bag. When hunting, limit the amount of metal on your body, which includes wearing non-magnetic boots and belts. Put your car keys in your back pocket. Keep your cell phone in your back pocket, too, and make sure it’s off to avoid any interference.

Shop for VLF metal detectors here.

Posted by: AT 09:00 am   |  Permalink   |  Email
Saturday, December 05 2020

With gold prices on the rise, you might be wondering if now is a good time to sell some of the gold you’ve found over the years.  And ifsell your gold you decide it is, you might also wonder how to best sell that gold and to whom. The type of gold any buyer is interested in varies, and will largely depend on what form of gold you have.

Gold dust consists of flour, fines and flakes. This is the stuff most prospectors find as a result of panning, sluicing and dredging. This form of gold is probably the lowest value because it will have the most impurities. Small nuggets start at about 1 gram  and are a step up from gold dust  in value. Medium nuggets, on average, weigh up to 31 grams or 1 troy ounce. Large nuggets are defined as weighing 1 troy ounce or more. Larger nuggets usually command higher prices, and could be considered museum quality. Gold in quartz is usually a collector’s item or a museum piece, therefore, prices widely vary.

Keep in mind, though, that even nuggets that appear to be pure gold are not. They will have impurities embedded and blended into the matrix. There is no such thing as 100% pure gold from nature.  In fact, in North America, the average purity for prospected and mined gold averages 60% - 85%. The impurities in natural gold consist of metals such as silver and copper and other minerals that have combined with gold on a molecular level. Tests, referred to as an “assay” must be performed to accurately measure the purity of gold. Some jewelers and pawn shops can analyze your gold to determine purity with an XRF gun (X-Ray Fluorescence); expect to pay a charge for that service.

The majority of gold bought and sold from small-scale prospectors include: private buyers  (some advertise on eBay, Craigslist, and other online sites) pawn shops, independently owned jewelry stores that craft and repair their own jewelry, museums looking for unusual specimens or rare nuggets, and refiners. Most refiners are contracted by large gold mining operations, but some smaller refiners will purchase gold from prospectors in any form or mesh size. An internet search will reveal refiners that will buy from individuals.

If you want to sell your fine gold or nuggets, there are a few things to do first. You may not get a totally accurate assessment of your gold’s value, but you’ll at least have a ballpark estimate. Do NOT melt your gold. Keep it in its original form.

  • Clean up your placer gold dust. Be sure it is completely dry and then use a neodymium magnet to remove any black sand. After using the magnet, do a final rinse to remove any sand or grit that is not magnetic. Let the gold dry.
  • Clean your nuggets with ammonia or any type of cola. Put the gold and soda in a small plastic container with a lid and vigorously shake. Rinse and repeat a few times. Don’t scrub with a brush or abrasive material.
  • Weigh only your gold (not the container) in grams using an electronic digital scale. There are 31.1 grams in a troy ounce, which is the unit of measure for precious metals (a troy ounce is heavier than a regular ounce which equals 28.3 grams). Gold is also measured by pennyweights or grains. 1 troy ounce equals 20 pennyweight (or dwt). 1 pennyweight is 1.55 grams.
  • Determine the spot price, which is usually based on a troy ounce. Multiply or divide the weight of your gold by the daily spot price.

When you make contact with potential buyers who specialize in raw and natural gold, be sure to ask about and understand their procedures and policies and payments. Ask how your gold will be assayed and how the purity is determined. If you are shipping your gold to a buyer, understand their requirements for packaging and shipping, insurance, and other safeguards. Some buyers pay for the testing and shipping, others pass along the costs to the seller. Remember that buyers have costs and will not pay 100% of the spot price. The exception to this would be if you have museum specimens or very large nuggets. In those instances, buyers will pay more than the spot price.

Be patient and shop around to not only get the best price, but to find a buyer who you can work with now and in the future. Get recommendations from fellow prospectors, or clubs such as GPAA (Gold Prospectors Association of America). If possible, make your first transaction with a new buyer a small one to assess your experience and satisfaction with the overall sales process. When you feel you have had a successful first transaction, you’ll feel confident you can continue that relationship in the future.

If you've not yet found your first gold, get Alaska paydirt here.

Posted by: Denise AT 09:00 am   |  Permalink   |  Email
Monday, November 16 2020

The use of water for grinding and milling has been in practice for thousands of years.  From simple water wheels to inventors such as sluiceArchimedes of Ancient Greece and Bernoulli, a Swiss mathematician and physicist in the 1700s whose principles appear on modern day dredge nozzles, science has always advanced the use of water in our everyday lives. But have you considered just how much the dynamics of water can affect gold recovery?

Water Flow. The easiest example of how water dynamics affect gold is the classic inside bend in a waterway. When stream flow is straight and velocities are at their highest, gold will be suspended in the flow. As a bend in the stream causes flow to begin slowing down, the heaviest gold begins to drop out because the water no longer has enough velocity to suspend the material. The stream continues to lose power as the bend length increases and smaller and smaller gold continues to be deposited until there is no longer any in suspension, or the remaining water flow and speed cannot carry it farther downstream.

Water velocity and flow affect attempts at recovery in all capture devices in exactly the same way. Each piece of gold in classified material requires a certain flow and length of time to separate, drop out, and be captured based solely on its relative size and weight. If the velocity and flow are too great, the gold will remain suspended and will exit the machine regardless of machine length or method of recovery. This is why some miners are lured into a false sense of security just by using longer sluices.

Improper water depth in the sluice can create additional problems in recovery. Methods of material collection have much less effect if the gold is suspended in the upper part of the water flow. Most sluices provide little or no material agitation to break up the classified material and provide the necessary change in flow that facilitates gold separation. Lack of agitation allows smaller pieces to be carried through the equipment.

Classification. There is a direct relationship between material classification and water speed, which is often overlooked. It is common to classify for ease and speed of filling buckets rather than size of gold being targeted. Larger classification requires increased water speed to push the material through most recovery systems. The trade-off is forfeiting recovery of finer gold by increasing the length of drop time. This reduces the number of gold capture attempts and even machine effectiveness by having concentrations of larger material wedging into riffles, drops, etc.

Running dry material requires the sluice to liquefy the material while it is passing through. Gold particles will suspend in the dry material, reducing the chance of capture. Many miners use a scoop and drop their material into the machine in large clumps. This also allows particles to suspend instead of being processed. Material should always be wet prior to processing, and material should be cast (sprinkled) side to side across the machine when using a scoop.

Riffles. Some riffle designs are actually not that ideal for gold recovery. Some sluice riffles are evenly spaced, making them too far apart to impart the “vortex” or reverse underflow. What actually happens is an up-and-down wave motion as the water travels down the sluice. The only “action” imparted is the same negative flow that happens when water flows over a rock or some other obstacle in a stream. Material suspended at the bottom of the flow is deposited as the water climbs over the riffle and slows. Material that is heavy enough and can no longer be suspended drops. The rest of the material remains in the flow and continues to be carried down (and possibly out of) the sluice.

Flare. Most modern riffle sluices (standard and drop designs) are susceptible to improper setup angle, which can either clog the machine with material or blow it out completely. Either problem results in the loss of gold. Another big mistake in sluice design and operation is the “V” fallacy. The idea that channeling your water towards the center of the sluice using a wide-angle flare will increase its effectiveness and therefore increase gold recovery is false. On top of that, miners drop material into the center of the slick plate. This forces material into the center of the sluice, which is quickly overloaded by the volume of material and will cause the first series of riffles to lose their effectiveness.

Remove the flare from your sluice to eliminate the center concentration and create an even flow across the machine. You can create a V-shaped wing dam with a short straight section in front of your sluice if you need increased water flow or speed. Casting your material across the width of the sluice will eliminate overloading of the riffles.

Understanding how water height and speed changes your recovery can also make all the difference in boosting gold returns:  

Water height. Begin with the water flowing just above the riffles or drops. Run small amounts of material and watch as the dirt passes through the sluice. Notice how the material enters the riffles or droops. Be sure to use the correct method of casting material evenly from side to side. Gradually increase the water height until processing suffers. This will determine the minimum and maximum water height for your sluice or highbanker.

Water velocity (speed). Set your sluice water height for max processing and a fairly fast flow, then gradually reduce water speed as you process small amounts of material. You may have to adjust your sluice to maintain proper water height through this process. Note how changes in water speed decrease the quality of material processing.

Spend some time exploring water dynamics. Introduce only one variable at a time, and verify how your gold recovery is affected before moving on. No doubt, with a little more understanding and experimentation, you’ll recover more gold with your sluice!

Posted by: Denise AT 08:35 pm   |  Permalink   |  Email

Facebook
Pinterest
Twitter
Add to favorites

Nugget of News Blog