Skip to main content
our twitterour facebook page pintrest youtube
Latest Posts

 Nuggets of News Blog 

Sunday, September 13 2020

The most basic piece of prospecting equipment is the gold pan. Size, color, and shape are really a matter of personal preference. Plastic pans generally come in green, black, and blue. The color doesn't effect performance, but green is the most common. Plastic is light weight, so when you add water, dirt, and gravel to your pan, your arms won't get as tired compared to using a steel pan. It's good to have a couple different sizes of gold pans on hand (10 inch, 12 inch, and 14 inch are the most popular).  gold panning

Before you add a new pan to your collection, be sure to “condition” or “season” it for best results. The goal is to remove some of the oils that were used in the plastic mold when the pan was produced. These oils will make your pan too slick, and without some friction you may wash out the gold with the waste material. You’ll want to rough up the bottom and sides of the pan a little to get that all-important friction.  

To season a new gold pan in three easy steps, you will need some dish soap that cuts through grease (i.e., Dawn), a scrubby pad, sand, and some water.

1. Add a squirt of dish soap and water to the new pan. Scrub the pan with the scrubbing pad— get all the ridges and every inch of the bottom and sides.

2. Dump a scoop of sand into the pan. You just need enough to scratch up the pan a bit. Again, scrub the sand over the ridges and entire bottom and sides of the pan back in forth in different directions.

3. Rinse your pan, dry it, and have a look. If you see any shiny or glossy areas, repeat the steps from above.

Now you’re ready to use your new pan!  If you’re just getting started, try these gold panning techniques:

1. Fill pan about half full of gravel, small rocks, and sand collected from the stream bed

2. Put the pan under the water's surface, break up large lumps of clay or dirt, and remove stones
3. Continue to hold the pan level under the water with your hands on opposite sides, and tilt the pan forward, away from your body, and down slightly. Rotate and shake it side to side to let gravel and sand dribble out the front. Pick out the rocks.
4. Repeat step 3 several times until most of the material is removed, leaving  less than a cup of fine-grained dark material overlain with a thin layer of light material at the bottom of your pan.
5. Rotate the pan in a circular motion. Notice how the water separates lighter material from heavier.
6. Stop rotating and hopefully you'll see a flash in the dark material remaining in the bottom of your pan! Use tweezers to retrieve the gold and place in a vial for safe-keeping.

Practice makes perfect, and hopefully before long you’ll be yelling EUREKA when you spot the shiny stuff in your new pan!  Gold pans and gold panning kits found here.

Posted by: Denise AT 08:11 am   |  Permalink   |  Email
Saturday, August 01 2020

BLM Mining Claim FeesMining claimants who wish to retain their mining claims on Bureau of Land Management and Forest Service lands through the 2021 assessment year must pay a maintenance fee or file a maintenance fee waiver certificate on or before September 1, 2020, to prevent the mining claim from being forfeited.

The maintenance fee for an existing lode claim, tunnel site, or mill site will increase to $165 on September 1, 2020. For placer mining claims only, the fees will be $165 for every 20 acres of land or portion thereof. Miners who file a Small Miner’s Waiver on or before September 1 will be required to file an Affidavit of Assessment Work Form on or before December 30, 2020, including the $15 processing fee per claim.

Each payment must be accompanied by a written list of the claim names and BLM serial numbers for which the maintenance fee is being paid. You can find your state BLM office at

Please note that new mining claims filed on or after September 1, 2020, will be subject to the new fee schedule. 

It's highly recommended that you send your documents by registered mail or hand deliver them while retaining copies for your records.

BLM Mining Fee Payment PortalClaimants in all states except Alaska may pay their annual maintenance fee online through the Mining Claim Maintenance Fee Payment Portal found at You can pay your fees with an ACH checking or savings account. There is no dollar limit per transaction, except by the funds available in the account. You can also pay claims for multiple customers within a BLM Administrative State in one transaction. Simply search for claims using different customer names, and add all desired claims to an order until you are ready to pay.

When you get to the claim search page, select the state where your claims are located and enter either the last name of the claimant, the claim serial number, or the lead serial number to search for your claim.

Claimants who file on paper must include a document listing the claim/site name(s) and the BLM serial number(s) assigned to each claim for which the fees are being paid.

Do not forget to file new claim forms or affidavits of assessment with your county recorder as well.

Posted by: Denise AT 07:00 am   |  Permalink   |  Email

Add to favorites

Nugget of News Blog