Skip to main content
#
 
cart
our twitterour facebook page pintrest youtube
Latest Posts
Archive
Categories

 Nuggets of News Blog 

Saturday, December 02 2017

You might have heard the term “flood plain gold” and are wondering what it really means. A very simple definition is “fine-sized gold flakes carried or redistributed by flood waters and deposited on gravel bars as the flood waters recede.” When this “redistribution” occurs, it is usually after heavy winter storms that churned up rivers enough to turn part of the bedload over and move the river bar gravels from one place to another. Within these gravels is fine gold that was previously deposited there.  When waterways flow way up and above their normal banks, they generally drop the heavier gold in the front of the bar, and as pressure decreases, the finer gold starts dropping into the mixed gravel. Over time, some of this finer gold will work its way down to bedrock, but generally it stays on the move.

flood plain gold deposits

How did the gold get there in the first place? There are many classifications of placer deposits, and their definitions can provide the answer. Among the most well-known is stream placers. Streams carry gold from eroded veins and concentrate them in various ways. Modern streams refer to present-day gold-bearing waterways that are the most common sources of gold for today’s prospectors. Tertiary and intervolcanic channels are rivers buried from mud and volcanic flows that existed prior to our modern-day waterways. High benches were created as rivers cut their way deeper into the bedrock and could be located hundreds of feet above today’s modern rivers. Desert placers are generally the result of torrential flash flooding and not a constant water flow. Glacial stream deposits are created by melting glaciers that can concentrate gold if the water flow is sufficient. Marine or beach deposits can come from wave action against cliffs, from off-shore currents bringing in gold-bearing material from under the ocean, or even from gold-bearing streams that flowed into the beach area eons ago.

Since there is a strong possibility that gold can get moved around during storms, it’s now important to know WHERE to find this “dropped out” gold. The secret is to find that drop point and to capitalize on its accumulation. Fine gold looks fantastic in a pan or box, but its weight can be deceivingly light. It takes a lot of fine gold to be equal to a larger piece and to have enough weight to make the recovery effort worthwhile. Some of the best areas to look for flood plain gold are where the stream or river widens out, or levels out, or changes direction. The inside of a bend is good. Rocks and weeds and small shrubs are also potentially good collection spots. When checking out collection spots, be extra careful. Calm water on the surface can hide swift currents underneath.

Keep in mind that the effects of heavy winter rains and snow will not be the same on all waterways. Redistribution might occur to a larger degree on larger rivers. Or it could be the opposite where you live and prospect. No one hopes for an especially “bad winter,” but if Mother Nature makes it so, this information could be the silver lining— a way to turn lemons into lemonade come spring when you can get out and take advantage of any gold redistribution that occurs. Good luck and be safe!

Nugget of News Blog

Posted by: Denise AT 06:09 pm   |  Permalink   |  Email
Thursday, November 16 2017

It takes years and years for nature and its elements— dirt, rock, water, and sand— to smooth a rock's surface. But a rock tumbler can get you those same results in considerably less time. Although you should always refer to the owner's manual for the particular rock tumbler you own, if you're just getting interested in the hobby of lapidary and are wondering how a tumbler works, below are general tumbling instructions from Lorton, Inc., a leading manufacturer for the last 50 years.

STEP 1: (coarse grit) Fill the tumbler barrel 2/3 to 3/4 full with properly graded and sized stones. If the barrel is not full enough, you won`t get the proper tumbling action in the later steps. Add tLortone rock tumblerhe necessary amount of coarse grit to the stones in the barrel. After adding the grit, slowly add water until the water level is just touching the bottom of the top layer of stones. Do NOT overfill because too much water will inhibit the tumbling action. Run the tumbler for 24 hours, them open the barrel to release any slight gas build-up during the coarse grind. If the slurry appears pasty or very thick, add a small amount of water. Let the tumbler run for an hour and recheck, add water as needed.


The First (coarse) grind is the most important step and will take 7 to 10 days - be patient and don`t stop too soon. Note: If the stones are not all smoothly rounded, it is necessary to repeat the coarse grind step using a charge of new grit. The original grit will have broken down too much to provide additional shaping. After the 1st grind, you must clean the barrel and stones thoroughly to remove all traces of the coarse grit slurry. Do not pour slurry into your plumbing system, it will settle in the pipes and harden like cement. There should be no visible grit or slurry left on the stones, you are now ready for step 2.


STEP 2: (220 grit) Place the cleaned stones in the barrel, inspecting them as you go, and removing any that need more coarse grinding - if you have less than 2/3 barrel full of stones add plastic pellets to make up the additional volume. Add proper amount of water and grit according to table, reseal the barrel, and let it run for 2 to 3 days before checking stones. On the 7th day, they should have a smooth matte finish over their entire surface, if not run for additional 2 to 3 days. Plastic pellets will float to the top, remove and clean them as they can be used again. Use the same cleaning procedure you used in step 1.


STEP 3: (pre-polish) Place stones into the barrel, following previous instructions. Run for about a week, checking progress ever other day. Clean and inspect stones for final polishing stage.


STEP 4: (polish) Gently place the stones into the barrel to avoid any scratching or chipping. After charging the tumbler with water and polishing compound, add plastic pellets to increase volume to 2/3 - 3/4 full. The pellets will help carry the polishing compound and that will cushion the stones. Polishing should take 5 to 7 days. At the end of the this time, remove and inspect several stones. If they look the same when dry as they do when wet, your batch is finished. If, after 7 days, your polished gemstones appear to have a slight film on them, it can be removed and extra shine and luster added by burnishing step. Before burnishing, be sure to thoroughly clean the barrel and stones and recover the plastic pellets.


Burnishing: Place your stones into the barrel, add the same plastic pellets and proper amount of powdered soap (do not use any liquid detergents, dishwasher powders or any products that contain bleach or additives as these products will damage the barrel and ruin the polish). Add water as in previous steps and run for at least 4 days.

Whether you're just getting started in the hobby of lapidary, or you've been polishing rocks for decades, you'll find the rock tumbling equipment and accessories you need here.

Nugget of News Blog

Posted by: Denise AT 06:57 pm   |  Permalink   |  Email
Thursday, September 28 2017

For those of us with a strong dose of gold fever, the price of gold doesn't make much difference. Most gold nuggetsprospectors seem to get much more pleasure from the process of finding the gold rather than selling it. It's the thrill of the hunt! Plus, gold remains a sound investment over time as a hedge against inflation and instability.

You might recall when gold peaked in August 2011 at $1890 per ounce. That was a very exciting time in the news— media hype always follows whenever gold takes a strong rise or dips. Over the last few years, the price has come down and is averaging around $1200 per ounce. But you might be wondering where the price is going from here. If you take a look at the chart of gold prices, it can be an indicator of what's to come.

The key to the chart is recognizing resistance levels and support levels (high and low points). When a price bottoms out, it establishes a new floor. When it breaks below that floor it is considered "bearish" and likely to drop further since it broke a supporting base price. When it breaks above a resistance level, it indicates there is strong demand which could push the price to higher levels.

Between 1978-1980, gold prices went from $172 to $830 per troy ounce. In 1982, gold prices dropped back to $328 an ounce. It was not until 1999 that the price hit the low of $253 after the peak in 1980. Never having broken that price floor, it entered a recovery where it eventually broke above the high set in 1980, pushing to $944 an ounce by February 2008. Later that same year, in October, the price hit just under $830 before skyrocketing to that crazy high of $1890 per ounce! Since then, the price has dropped from its high just as it did in the early 1980s. Gold dropped to a new floor of $1066 at the end of 2015, before bouncing back to its current levels. Since the new floor was established, it has not been broken. Instead, the price climbed to $1340 per oz. by August 2016, dropped but stayed $100 above the prior low to $1163 and has since bounced back to around $1200. If the price continues to set new highs, even if it drops thereafter and continues to set higher lows on its way up, it is considered "bullish" or positive.

Why is the price of gold so important? Maybe it's not to the average prospector, but the price of gold has a direct impact on the level of involvement in prospecting. The next sharp rise in price might bring with it additional involvement from more people. The treasure seeker in all of us might just kick in, bringing more families out to the gold fields. Good luck! 

Posted by: Denise AT 04:52 pm   |  Permalink   |  Email
Sunday, August 20 2017

September 1st of every year is a very important date if you own a mining claim, mill site or tunnel site. That's small miner's waiverthe date your annual maintenance fees, or your Small Miner's Waiver, are due. The following information, appropriate forms, and more details also can be found on the Burea of Land Management website.

Maintenance Fee Payment Waiver Certification (Small Miner’s Waiver)
If a claimant owns 10 or fewer active claims/sites on Federal land nationwide, the claimant may qualify for a maintenance fee payment waiver also known as the small miner’s waiver.  Form 3830-2 must be used when filing a small miner’s waiver request and must be filed or postmarked (if mailed) on or before September 1 every year. There is no processing fee to file a waiver.  By filing a waiver, claimants are certifying that they and all related parties own 10 or fewer claims and sites nationwide and that assessment work has been or will be performed, and that the proper affidavits of assessment or annual labor will be timely filed.

The maintenance fee and small miner’s waiver must be paid or filed in the Bureau of Land Management (BLM) state office (in Alaska, the Fairbanks District Office also accepts fee payment) of the state where the claim or site is located.  If a claimant owns claims or sites in multiple states, a fee or waiver must be paid or filed in each state where each claim or site is located.  Failure to timely pay the fee or file the waiver in the proper BLM office will subject your claims or sites to forfeiture by operation of law.

Annual Assessment Work
Claimants requesting a small miner’s waiver from paying the annual maintenance fee, must perform assessment work and spend a minimum of $100 in labor or improvements on each claim, and record evidence of such with the BLM on or before December 30 of the calendar year in which the assessment year ended.  The same document that the claimant records with the county must be filed with the BLM.  The BLM processing fee is $10 per claim for recording an affidavit of annual assessment. The assessment work must be performed within the period defined as the assessment year.  Assessment work includes, but is not limited to, drilling, excavations, driving shafts and tunnels, sampling (geochemical or bulk), road construction on or for the benefit of the mining claim; and geological, geochemical, and geophysical surveys. Optional Form 3830-4 may be used for affidavits of assessment filed with the BLM.

Assessment work is not a requirement for owners of mill or tunnel sites; however, a notice of intent to hold (NOIH) the site must be filed on or before December 30. The BLM requires a $10 processing fee per site for filing a NOIH.

mining claim fees

Claimants (except those in Alaska) may pay their annual maintenance fee online through the Mining Claim Maintenance Fee Payment Portal.  This site is available 24 hours a day.  The BLM payment portal provides the ability to query eligible mining claims and sites for payment through an interface with the Legacy Rehost 2000 (LR2000) public reporting database; select claims and sites to be paid; and then transfer to Pay.gov for payment of the maintenance fees for the selected claims and sites.  At this time, only credit card payments are accepted and treasury limits apply.

Claimants who file on paper must include a document listing the claim/site name(s) and the BLM serial number(s) assigned to each claim for which the fees are being paid. Form 3830-5 (lode claims) and Form 3830-5(a) (placer claims) may be used to list claims and sites when making payments by check or credit card directly to the BLM state office for the state where the claims or sites are located.

Posted by: Denise AT 04:20 pm   |  Permalink   |  Email
Sunday, July 02 2017

Every prospector has his or her own opinion as to the best material to have under the riffles of your sluice box— miners mossDeep V Matting, Carpet, or Miners Moss. There is no single right answer just like there is no single right answer for which brand or size of sluice to use— the one you take to a beach for fine gold recovery is probably not the same sluice you should use in a river when shoveling in unclassified material.
 

  • Carpet holds onto the finer gold particles when wet, making cleanup harder. To get every bit of gold, dry the carpet in the sun, then later shake it over a gold pan or tub to ensure you collect every grain of gold.
  • Miners Moss is a good choice for stream sluices. It will help catch the gold and let the larger waster material run over the top and out of the box. It’s also great for collecting super fine gold. Miners Moss has two weaves— use the larger side when bigger gold is present, and use the tighter weave on the back side at the beach or anywhere you tend to find multiple sizes of gold.


No matter if you favor miners moss, matting, carpet, or a combination, using expanded metal over these materials can help create even more small pockets to help the fine gold drop out.

Posted by: Denise AT 01:52 pm   |  Permalink   |  Email
Wednesday, June 14 2017

Fun and exercise are two great reasons to go gold prospecting, but you might as well make some money while you're at it, right? The best way to do that is to increase production rates. Assuming you are mining on a known gold-bearing claim or waterway, volume is the key to your success!

gold panningGraduating from the basic gold pan to some other form of simple equipment is the best way to increase production rates. Just going from a pan to a sluice will increase production by at least 500%, depending on how it is used. A highbanker will work about the same amount of material as a well-run sluice, though it can move the water to you instead of you bringing the gravel to the water, thereby dramatically incsuction dredgereasing volume of production. A drywasher will produce similar results by allowing you to work without water.

A dredge or highbanker/suction dredge combo is the next step up. A dredge uses a gas motor to generate the suction that will load and transport the material to the sluice, which greatly increases volume, as well as allows you to reach gravel on the river bottom that would otherwise be inaccessible (unless the river is seasonal or there is a prolonged drought). The more material a dredger can push across the riffles, the more gold can be recovered. An additional benefit to dredging is that it also allows you to clean gold out of all the cracks and crevices in the bedrock. A shovel just cannot do that.

The size of the dredge intake nozzle is the most important factor in how much material a dredge can process, but it is not a direct one-to-one relationship. For example, a 5 inch dredge will not move twice the material that a 2.5 inch dredge can move. It actually can move much more. The surface of the hose is figured in square dredge nozzleinches, the area (and therefore the volume) goes up much faster than the diameter and the corresponding production rates go up proportionally. A larger hose size will also clog less because more sizes of rock and gravel will pass through. Having to stop and remove clogs can significantly reduce the time you get to spend actually moving dirt and finding gold. No matter the size, you're likely to have rocks jam up the hose from time to time, but generally, the larger the hose the less frequent the clogs that slow or stop production. In most areas of the country, a 2 inch dredge is considered a "recreational" size and may not require a permit to use, whereas much larger nozzle sizes would require a permit. Always know the laws where you intend to gold prospect and mine before you buy equipment.

Beyond dredges or highbanker/suction dredge combos, you can get into some professional mining set-ups that use trommels and jigs and shaker tables and earth moving equipment. Every deposit is different, varying in size and grade and structure. Environmental conditions and access will dictate mining methods and knowing the rock types and size of the gravel is critical in determining which equipment will work best for increasing your production. Finding a suitable deposit to mine and finding a way to work it economically— to justify your time and expense— is the first step.  Then choose the right equipment to increase your recovery rate and speed of recovery and make more money.  Good luck!

Posted by: Denise AT 04:00 pm   |  Permalink   |  Email
Saturday, April 29 2017

The NEW Ameritek metal detectors have arrived!  The Minuteman, Liberator, and Patriot, are three new Ameritek metal detectorstreasure finding machines from Teknetics with true blue American graphics on their faceplates. Proudly made in the USA by Fisher Labs, these units are making award-winning metal detectors affordable again! Whether you're looking for the ease of a turn-on-and-go coin shooter or want more features for gold prospecting, you will find it in the affordable Ameritek line. All three detectors feature waterproof searchcoils, large two-digit numeric displays, and are perfectly balanced and light-weight so you can swing all day. Click the links below to check out the features of each new machine and use coupon code A1486 for $50 OFF + FREE SHIPPING + FREE Accessory Kit! Free Accessory Kit available only through 7/11/17.

minuteman metal detectorMinuteman

• Turn-on-and-go, well balanced and lightweight
• Pinpoint mode with depth indicator (CM or IN)
• Motion discrimination mode
• Variable tone breakpoint
• Large 2-digit numeric Target-ID numbers, from 1-99
• Adjustable sensitivity and discrimination
• Fe-Tone - Adjustable Iron Audio
• 8-inch concentric waterproof searchcoil

Click here to get it for $199 AND FREE SHIPPING AND FREE ACCESSORY KIT with coupon code A1486


Liberator metal detector

Liberator

• V-Break, variable tone breakpoint
• Pinpoint mode with depth indicator
• Discrimination, motion, no motion
• Variable notching
• Large 2-digit numeric Target-ID numbers, from 1-99
• Adjustable sensitivity and discrimination
• Ground Grab, computerized ground balancing
• 2 search modes
• 4-Tone Audio-ID
• 11-inch waterproof DD searchcoil

Click here to get it for $299 AND FREE SHIPPING AND FREE ACCESSORY KIT with coupon code A1486

patriot metal detector


Patriot

• Detects coins to 12 inches
• 13 kHz frequency – good for coin shooting, relic hunting and gold prospecting
• Frequency shift for eliminating electrical interference
• Visual Target-ID by category and 0-99 numerical indication
• Target-ID confidence bar
• Continuous ground mineral concentration readout
• Push-button static pinpoint
• Speed selection – normal for most conditions, slow for deep coins in non-trashy areas
• 11-inch waterproof DD searchcoil
• 40 hours of battery life (4 AA batteries)

Click here to get it for $399 AND FREE SHIPPING AND FREE ACCESSORY KIT with coupon code A1486


Guidelines for All Metal Detectorists

Realize that each time you go detecting you will be representing EVERYONE in this sport; all will be judged by your actions. Detectorists are a very visible group and the public knows what you are doing. That is why you must conduct yourself accordingly, learn proper recovery techniques and abide by a code of ethics. Scars from improper or sloppy recovery methods can remain for years and further damage the image of this activity. This can only lead to tougher laws and regulations. Even in remote areas it is very important to always leave no sign you were there.

Learn about your local laws regarding metal detecting, especially on Federal, State or County lands, because they can vary significantly from state to state. Make the effort to search the local public records to verify the laws regarding metal detecting in your area BEFORE you go detecting. Do the same with State and Federal agencies that govern lands AND waters in your area.

If you will be hunting on private property you MUST obtain permission ahead of time and be absolutely certain you know the exact boundaries of the property or yard. Check with your County land records office (usually County Seat) to obtain information on how to research or obtain land ownership plats. In some places this information is available online or you may be able to purchase a plat book for your County (some libraries also have copies you can view). These plat books are useful tools, showing owner’s name and boundaries, as well as Federal-, State-, and County-owned lands. However, it is your responsibility to still check with the land owner to verify the plat map is correct. Penalties and fines can be very costly. Ignorance of the law is not an excuse. Once you have a name, try to locate the owner’s address and pay him a visit. Introduce yourself, express your interest and ask if he would allow you to metal detect on his property.

Explain your practices and how you will proceed. Always be polite, even if he turns down your request. If given permission, find out if there are any limitations he might have; certain times of the day, where to park your vehicle, certain areas that might be off limits, etc. Above all else, you must carefully cultivate the relationship between yourself and the land owner to ensure that you always have his/her best interest in mind. Often there may be others, such as hunters, using their property as well. Crop lands might be leased to a farmer; buildings may be rented or leased to other families. If your activities offend any other users, they will also offend the owner and that will reflect negatively on the sport. You may even get kicked off the property. When you are on private property, your actions and activities must always be beyond reproach. You must always put the owner’s concerns above all else. And this is just as true if you are in a City park or on school grounds. There are numerous cities across the country that have banned metal detecting on city property, and in nearly every case it is because of a careless detectorist that left holes and trash. Always respect the land owner!

Your detector comes with the responsibility to detect and recover targets ethically. Your actions WILL affect the sport so be sure you portray yourself in the best possible way. Look for a local dealer or club in your area. They can offer up-to-date information on local conditions and laws, and teach you proper recovery techniques. Joining a club is a great way to give a stronger voice to the activity. You will find that club members have a strong stake in keeping the sport healthy by watching for violators or those not using proper recovery techniques. The goal of most clubs is to educate and teach those in this activity. With your ethical participation, you will help ensure we can all enjoy this activity for years and years. Please be responsible!

Posted by: Denise AT 04:00 pm   |  Permalink   |  Email
Saturday, April 01 2017

Typical winter storms that regularly occur in gold-bearing areas usually do not create enough havoc to force substantial amounts of "new" gold into movement. However, when Mother Nature really goes to work over a “bad” winter, a great deal of gold can be set free, creating a bonanza for gold hunters in spring and summer. Gold veins that have been hidden for decades suddenly can be exposed. Floods can also sweep gold out of abandoned mines and wash it downriver. Known gold digs can be washed out, trees uprooted, and the landscape eroded— all pluses for prospectors! flood gold season

When tons of rock, cobble, and boulders are swept downstream along bedrock during a huge storm, quite a bit of destruction occurs. Plants, weeds, and trees that normally grow along the river and gravel bars are washed away. And when a major storm or flood tears up large portions of a streambed, a fair amount of this newly-released gold, because of its weight, will be deposited along the riverbed and settle into cracks and crevices (hand dredges are an ideal tool in this situation).  Flooding on this scale occurred in Colorado in 2013. After the heavy rains in the west this winter (in California, Oregon, and Washington to name just a few affected states), this summer promises to be one of the best seasons for small scale miners in many areas. Even farmers in Thailand are looking for gold now to try and make up for the economic loss of ruined pineapple crops caused by floods.

Stream bed layers caused by several floods over time are referred to as “flood layers.” Flood layers are usually a different color, consistency and hardness from the other layers of material within the streambed, making them easy to recognize. Larger, heavier pieces of gold will work their way down toward the bottom of a flood layer as they are washed downstream. The smallest and lightest flakes of gold might not work their way down through a flooding layer at all, but might remain dispersed within the material. Of course not all flood layers contain gold in large quantities, but it’s a good place to start. In early spring, rivers are still high in most places, but in the next few months, stream beds could be exposed for better gold hunting. Some of the best areas to look for flood gold are where the stream or river widens out, or levels out, or changes direction. These areas can allow concentrations of gold to collect either on bedrock or in the contact zones between layers. Another place that tends to collect gold are gravel bars, especially the ones located towards the inside of bends in a waterway.

No one ever hopes that Mother Nature releases the type of fury that causes loss of life and property, but when a catastrophic weather event occurs in a gold-bearing area, take advantage of it. Get out there and get your share of the shiny stuff! With so much more runoff than normal shaking gold from them thar hills, the best prospecting will come in the summer months when the water has receded. Good luck and be safe!

Posted by: Denise AT 02:38 pm   |  Permalink   |  Email
Wednesday, March 08 2017

You might think that glaciers are important to gold prospecting only in Alaska and the Yukon, but glaciers have also affected placer deposits in the Midwest and some western states, too. 

What is a glacier?

Glaciers are formed when a huge mass of ice is created by accumulated snow. The body of ice grows over the years when more snow falls during colder months than melts during warmer months. Glaciers shrink when the melting is greater than the snow accumulation. Once the weight of the glacier grows large enough, the weight of the snow and ice presses down anglacier goldd compacts. The body of ice will then slowly flow downhill. The power of the solid ice moving downhill rips loose rock and soil. Solid rock underneath the glacier that is firmly attached to the mountain will stay in place, but be polished and smoothed as the glacier slides over it. Scratch marks and gouges appear along the surface of these polished rocks and indicate the direction that the glacier was moving.

Eventually the body of the glacier reaches a warmer elevation where the ice melts more easily. Here, at the foot of the glacier, are gigantic piles of rocks and boulders and debris that have been bulldozed down by the moving massive glacier. These glacial gravels are known as “moraines.” However, finding gold in this unsorted jumble of glacial moraine material produced by a glacier’s bulldozing effect is like finding a needle in a haystack—not worth the time to process…. until the glacier’s natural melt waters or another water source washes through it, and does a bit of natural sorting.

Alluvial gold deposits

Normal alluvial placer deposits form by the power of flowing water washing away lighter materials and gravels and leaving behind heavier material such as gold— very similar to what happens in a sluice box when the flow of water washes away the lighter materials and the gold is deposited in the riffles.  When flowing streams and glacier melt water process and wash away the glacial moraine gravel, the gold works its way downward.  Gold will then be deposited on bedrock or false bedrock (such as clay or other packed material). As the glaciers themselves melt, the huge quantity of water creates an effective sluicing system that can sort the gold out of gravels. These flows can leave behind very profitable pay zones along the channels cut by the ice melt waters on bedrock benches, among packed false bedrock gravels, and on the downstream side of bedrock high spots.

Where to look for glacial placer gold deposits in the West

In California, glaciers still exist in the southern Sierra Nevada, small parts of the Cascade ranges and the Shasta-Trinity Alps. In the northern Sierra Nevada and higher parts of the Klamath and Trinity ranges, that area’s placer deposits were greatly affected by glaciers that existed thousands of years ago. Glacial derived placer gold is important in a number of other western states, too, including Idaho (Boise Basin and Mount Pisgah), Montana (Pioneer District, upper portions of Gold Creek near Deer Lodge) and in Colorado (Fairplay District, Arkansas River Valley in southern Lake County).

Where to look for glacial placer gold deposits in the Midwest

What you might be very surprised to know is that glaciers are the source of nearly all the placer gold found across the Midwest. During the past ice ages (which were repeated events, not just a one-time occurrence), great sheets of glacial ice leveled the middle parts of North America, acting like giant bulldozers by pushing enormous amounts of material southward from Canada. When the ice melted, the area was left with extensive glacial moraine (gravel) deposits. Although it’s spotty and sporadic, some of these glacial deposits have gold, depending on where the glacial gravels came from in Canada and if that region was gold-bearing. Glacial gold is found in several of the northeast states such as New York, Vermont, and Pennsylvania. Glacial gold is also found more extensively in Midwest states such as Indiana, Illinois, Ohio, Michigan, Wisconsin, Iowa, Minnesota, Kansas, Nebraska, Missouri and the Dakotas.

All things considered, while glaciers can destroy a placer deposit, the moraines they leave behind can produce some very worthwhile deposits of gold, and are worth prospecting if you live in or visit these areas.

Posted by: Denise AT 03:03 pm   |  Permalink   |  0 Comments  |  Email
Sunday, January 29 2017

Make plans this spring to attend a GPAA Gold & Treasure Show! Whether young, old, or in the middle, the expos offer something for everyone and provide the best opportunities to learn new skills, see product demos, and rub elbows with some of the most respected miners and metal detectorists in the business!gold show

Browse the show floor to find the latest and greatest gold mining and metal detecting equipment, attend free seminars, ask questions of the pros, and enter to win thousands of dollars in door prizes—metal detectors, pans, sluice boxes and MORE!

Also on the show floor are panning troughs for both kids and adults where you can learn new techniques— and keep all the gold you find!

Saturday show hours 10 am - 5 pm and Sundays 10 am - 4 pm in these cities:

  • Pleasanton, CA  Feb 11-12, 2017
  • Phoenix, AZ  Mar 11-12
  • Puyallup, WA  Mar 18-19
  • Portland, OR  Mar 25-26
  • Las Vegas, NV  Apr 22-23

Visit the GPAA website for details and to buy your $5 adult tickets online ($10 adult admission at the door; kids 12 and under plus military and veterans with ID are free).

Did you know... there is actually more gold to find today than the old-timers found way back in the 1800s gold rush era? Gold prospecting and treasure hunting has become a very popular and family oriented hobby, and these Gold and Treasure Shows are a great place to start in your search for that elusive shiny metal. See you there!

GPAA Gold Shows

Posted by: Denise AT 05:45 pm   |  Permalink   |  Email

Facebook
Pinterest
Twitter
Add to favorites

Nugget of News Blog